split spherical roller bearing,
angular contact bearing
Split Roller Bearings
standard bearings series to accommodate a variety of shaft sizes:
For certain bore sizes in the range 75mm to 150mm also offer the 100 Series. Lighter duty than the 01 series, it is more compact and capable of higher operating speeds.
The most commonly used, 01 / 01E series are intended for medium duty applications with a wide range of speeds. 01E series are available in 45mm to 105mm size range, and 160mm to 300mm size range, and offer enhanced load carrying capabilities, and can be considered for applications where 02 series were previously considered.
The 02 Series offers a more rugged bearing solution for demanding applications where the 01 Series may not be suitable. The 02 Series also operates over a wide range of speeds. For a given shaft size, the 02 Series offers more radial and axial capacity than the 01 Series.02E series are available in 160mm to 300mm size range, and with enhanced load carrying capabilities, they can be considered for applications where 03 series were previously considered.
Designed for extreme loading conditions the 03 Series tops the capacity of the 02 Series and offers the highest load ratings of all standard series.
Split Tapered Bearings
The split tapered bearing is intended for the 'fixed' bearing position of shafts where there are both radial and axial loading and our split roller bearing is unsuitable.
It is constructed with two rows of opposed rollers to take axial loading in either direction.
While specifically designed for the marine industry, these split tapered bearings can also be used in other applications such as double-inlet fans in a number of different industries.
They are mounted in a cartridge in a similar way to that of the Split Roller Bearing and are machined with grease groove seals as standard and also provision made for a temperature element.
Completely split to the shaft
Easy & quick assembly
In situ change out
Extended application life