LM11949 / LM11910 Single Row Ball Bearing Rollers For Gearbox
Contact Person : Dave-Lee
Phone Number : +86 13213639372
WhatsApp : +8613213639372
|Keywords:||China Four Row Tapered Roller Bearings Suppliers|
electric motor bearings,
anti friction bearing
Bearing number : HH144642/HH144614
Size (mm) : 200.025x393.7x111.125
Brand : Timken
Bore Diameter (mm) : 200,025
Outer Diameter (mm) : 393,7
Width (mm) : 111,125
Bearing dimensions and specification in Timken catalogue:
d - 200,025 mm
D - 393,7 mm
T - 111,125 mm
B - 111,125 mm
C - 84,138 mm
R - 6,3 mm
r - 6,3 mm
a - -33,8 mm
Da - 356,5 mm
db - 235 mm
da - 226 mm
Db - 352 mm
Aa - 15,6 mm
Ab - 1,4 mm
Weight - 60,66 Kg
Basic static load rating (C0) - 2600 kN
Factor (G1) - 1470,9
Factor (G2) - 128,3
Factor (Cg) - 0,0416
Factor (K) - 1,96
Basic dynamic load rating (C90) - 427
Basic dynamic load rating (Ca90) - 218
Basic dynamic load rating (C1) - 1650 kN
Calculation factor (e) - 0,3
Calculation factor (Y) - 2,01
Tapered roller bearings have tapered inner and outer ring raceways as well as tapered rollers. They are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor : the larger the value of e, the larger the contact angle.
Tapered roller bearings are uniquely designed to manage both thrust and radial loads. Consisting of a "tapered cup" and a "tapered cone", this design is one of the most basic and common styles in the bearing industry. Found in everything from cars to conveyor lines, tapered roller bearings are more versatile than any other bearing series. Our taper bearings are sold in sets with both the cup and the cone together.
Find everything you're looking for in one place. Our massive inventory at The Big Bearing Store has almost everything in stock and ready to ship. Our friendly and knowledgeable staff is ready to assist you in finding
whatever you need.
The optimized roller end design and surface finish on the flange promote lubricant film formation, resulting in lower friction. This also reduces frictional heat and flange wear. In addition, the bearings can better maintain preload and run at reduced noise levels.
Long service life
The crowned raceway profiles of basic design bearings and the logarithmic raceway profiles of Explorer bearings optimize the load distribution along the contact surfaces, reduce stress peaks at the roller ends , and reduce the sensitivity to misalignment and shaft deflection compared with conventional straight raceway profiles.
Enhanced operational reliability
Optimized surface finish on the contact surfaces of the rollers and raceways supports the formation of a hydrodynamic lubricant film.
Consistency of roller profiles and sizes
The rollers incorporated in tapered roller bearings are manufactured to such close dimensional and geometrical tolerances that they are practically identical. This provides optimal load distribution, reduces noise and vibration, and enables preload to be set more accurately.
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Tapered roller bearings typically have a running-in period, during which a conventional design tapered roller bearing experiences a significant amount of friction, resulting in wear. This effect is noticed as a temperature spike (diagram 1). With tapered roller bearing designs, friction, frictional heat and wear are significantly reduced, provided the bearings are mounted and lubricated correctly.
Separable and interchangeable
Depending on the design, tapered roller bearings are separable and components of same-sized bearings are fully interchangeable. For example, single row tapered roller bearings are separable , i.e. the inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). This facilitates mounting, dismounting and also maintenance inspection routines.
Minimum Order Quantity :1 Piece/Pieces
HM262749TD/HM262710 Price: competitive price: Different quality, different prices, different prices from different suppliers, detailed price inquiry to the right suppliers
Payment Terms :T/T, Paypal, Western Union or MoneyGram...
Precision Rating: P0~P2 ; ABEC1~ABEC9
Vibration: V4, V3, V2, V1
Inquiry ways: The right of the inquiry box, Email, skype, Whatsapp
Dear Purchasing manager, If you want to buy HH144642/HH144614 Double row inch taper roller bearings old model weight 105 kg item, Dimensions: (IDxODxB) or consulting related technical questions and we will spare no efforts to satisfy your requirements by rendering you the superior quality, the most competitive HH144642/HH144614 20 prices, premium service and any other specific need, Please fill out an enquiry to the Enquiry box,choose the following suppliers seriously, then submit, Login or register in the pop-up box,Finally go to the website backstage which show "your post success" means the enquiry sent successfully. In login or register to submit need a little time, please be patient.