Contact Us

Contact Person : Dave-Lee

Phone Number : +86 13213639372

Free call

Hard-alloy radial bearings ,Hard alloy inner top Radial bearing for downhole drilling motors

Minimum Order Quantity : 1 Price : 100USD
Packaging Details : Single box/Wooden case Delivery Time : 35 days
Payment Terms : TT Supply Ability : 1000pcs/day
Place of Origin: LUOYANG Brand Name: MONTON
Certification: ISO9001 Model Number: ДВ95-Р.00.220.00

Detail Information

Application: Oil Drilling Motor Or Downhole Motor Or Electric Submersible Pump Customer: Oil Company SLB,GE,Wolf,etc
ID: 50mm OD: 64mm
Length: 75mm Material: 42CrMo
Tungsten Carbide: YG8

Product Description

Hard-alloy radial bearings
 
MONTON has mastered production of hard alloy radial bearings using hard alloy plates of different configuration. Intervals between hard alloy plates are filled with wear-resistant material featuring much higher heat conductivity compared to the hard alloy. This excludes cracking of the hard alloy as the result of thermal shock at high radial loads or high sliding speeds.
 
One of the main stages of the mentioned radial bearings production is grinding and polishing of operating surfaces. Specialized production area is organized for grinding and polishing of the hard alloy radial bearings using diamond grinding wheels and diamond polishing compounds. The photos show the production area and fragments of the grinding process of external and internal friction surfaces of the hard alloy radial bearing.
Combination of the abovementioned technological processes realized during the production of the hard alloy radial bearings provides good quality of the products, and, as the result, high reliability and durability of the bearings at different operating conditions for both positive displacement motors and turbodrills.
The hard alloy radial bearings for PDM's and turbodrills are produced in a wide range of sizes as per customers' drawings:

Parameter Bearing diameter Bearing length
Inner
diameter
20mm-800mm 20mm-800 mm
Outer
diameter
30 mm-900mm 20 mm-800 mm

The operating conditions of the radial bearing run are agreed beforehand:
speed of rotation of the motor shaft , pressure drop across the bit, mud type ( drilling fluid), well configuration (deviation parameters), places of the bearing location in the motor bearing section ( at top, bottom).


 

Drawings for reference:

Hard-alloy radial bearings ,Hard alloy inner top Radial bearing for downhole drilling motors 0


 
Raw Materials
 
Bearing Bodies can have many various compositions some of the most common are: 4140, 4145, 4330V, or 4340. Custom configurations are available upon customers request. Standard bearing body material makeup is as follows:
 
Mechanical properties:
Tensile strength ≥1080
Yield strength ≥ 930
Elongation δ5 (%):≥12
Reduction of cross-section area ψ (%):≥ 45
Ballistic work: Akv (J):≥63
Impact toughness αkv ≥78
Hardness:≤217HB
After sintering and forced air cooling:
 
Tensile strength: 827 Mpa
Yield strength Rp0.2: 668 Mpa
Elongation: 13%
After thermal refinement:
 
Tensile strength: 931 ~ 955 Mpa
Yield strength Rp 0.2: 804 ~ 835 Mpa
Elongation: 24.5 ~ 26%
Chemical Composition of Bearing Body (Substrate):
C: 0.38~0.45
Si: ≤0.40
Mn: 0.60~0.90
S: residue ≤ 0.035
P: residue ≤ 0.035
Cr: 0.90~1.20
Mo: 0.15~0.30
Chemical Composition of Tungsten Carbide:
Hard Alloy Insert (YG8)
Composition: WC92%, Co8%
Density (g/cm3): 14.5 – 14.9
Hardness (HRA): 89 – 91
Flexural strength (σbb/MPa): 1500
Impact toughness σK/ (J/cm2): 2.5
Cast Tungsten Carbide Powder:
Composition: WC 96%, Ct < 4%
Particle distribution, +80 mesh ~ -200mesh
Binding alloy:
 
Composition: Cu, Ni, Zn, Mn
 
 
Performance:
 
1) Highly resistant to abrasion, erosion, corrosion, and mechanical failure
2) Extremely resistant to chipping, cracking, and flaking which are inherent problems in cladding or welded overlay processes
3) High heat conductivity eliminates thermal cracking
4) Proprietary design eliminates catastrophic downhole radial bearing failure
5) Carbide tile and matrix design ensures extended life compared to cladding or welded overlay designs
6) Inner and outer components can be reconditioned.
7) The hardness of body surface can reach 30-37 HRC.
 
Bearing pictures
 
Hard-alloy radial bearings ,Hard alloy inner top Radial bearing for downhole drilling motors 1
Bearing Application:
Hard-alloy radial bearings ,Hard alloy inner top Radial bearing for downhole drilling motors 2
Hard-alloy radial bearings ,Hard alloy inner top Radial bearing for downhole drilling motors 3
Quality assurance:
Hard-alloy radial bearings ,Hard alloy inner top Radial bearing for downhole drilling motors 4

 
 

You Might Be Into These
Get in touch with us

Enter Your Message

montonbearing01@163.com