KA020CP0 Kaydon Thin Section Bearing for Robert , Slim Section Bearings
Thin section bearings have high precision, are very quiet and have high load carrying capacity . These ball bearings are available in three different designs and have an extremely small, predominantly square cross-section. Within each series, the cross-section remains constant even for larger shaft diameters and housing bores.
Details of thin section bearing
The bearings are therefore also described as Constant Section (CS). This special feature distinguishes thin section bearings from conventional bearings as standardised in ISO series.
It is therefore possible to select a larger cross-section and thus use a bearing with
higher load carrying capacity without the need to change the shaft diameter as well.
Thin section bearings allow designs to be achieved that are extremely light and require little space.
Thin section bearings are available as deep groove ball bearings (C), four point contact
bearings (X) and angular contact ball bearings (E). Each of these designs is available in
various series. The series correspond to the crosssection sizes.
Angular Contact Ball
Radial contact Ball
(Deep Groove Ball)
Four Point Contact Ball
|KAA||Type A-KAA||Type C-KAA||Type X-KAA|
|KA||Type A-KA||Type C-KA||Type X-KA|
|KB||Type A-KB||Type C-KB||Type X-KB|
|KC||Type A-KC||Type C-KC||Type X-KC|
|KD||Type A-KD||Type C-KD||Type X-KD|
|KF||Type A-KF||Type C-KF||Type X-KF|
|KG||Type A-KG||Type C-KG||Type X-KG|
|Sealed Bearings||JHA||/||Type C-JHA||Type X-JHA|
|JA||/||Type C-JA||Type X-JA|
|JB||/||Type C-JB||Type X-JB|
|JU||/||Type C-JU||Type X-JU|
|JG||/||Type C-JG||Type X-JG|
|Stainless Steel||SAA||Type A-SAA||Type C-SAA||Type X-SAA|
|SA||Type A-SA||Type C-SA||Type X-SA|
|SB||Type A-SB||Type C-SB||Type X-SB|
|Metric Series||8mm||Type A-8mm||Type C-8mm||Type X-8mm|
|13mm||Type A-13mm||Type C-13mm||Type X-13mm|
|20mm||Type A-20mm||Type C-20mm||Type X-20mm|
|Ultra-Slim||Ultra-Slim||Type A-Ultra-Slim||Type C-Ultra-Slim||Type X-Ultra-Slim
|Tel :||+86 13213639372|